我的煤炭网

我的煤炭网>新闻>综合信息>选矿知识>玻璃厂尾矿砂(制作玻璃的矿物)

玻璃厂尾矿砂(制作玻璃的矿物)

玻璃厂尾矿砂(制作玻璃的矿物) 用尾矿熔化& nbsp:& nbsp;& nbsp一、概述:& nbsp& nbsp& nbsp玻璃离聚物是通过过冷熔体获得的非晶和无定形体的均匀各向同性固体材料。 具有良好的力学性能:抗压强度5000 ~ 20000 kg/cm2,变形强度不低于450 kg/cm2。体积密度为2500 kg/m3,导热系数在0.6-0.75之间,硬度在5度以上。 同时,玻璃是一种化学稳定性很高的材料。除氢氟酸外,对其他酸相当稳定。碱性溶液甚至纯水虽然能损伤玻璃表面,但效果不强,进度极其缓慢。 & nbsp& nbsp& nbsp& nbsp玻璃被广泛使用。除了工业技术,一般建筑都需要玻璃,很多家用器皿也可以用玻璃制作。 & nbsp& nbsp& nbsp& nbsp玻璃是硅酸钾、钠、钙、铝的复合体,化学成分主要是二氧化硅(SiO2),其次是氧化钠(Na2O)、氧化钾(K2O)、氧化钙(CaO)、氧化镁(MgO)、氧化铝(Al2O3)。 & nbsp& nbsp& nbsp& nbsp制作玻璃的主要原料是石英砂或应时砂岩;其次是长石、石灰石、白云石、萤石、纯碱、芒硝、硼酸、重晶石、碳酸钾、红丹、锌白等。 除上述原料外,目前以应时或长石为主的尾矿作为玻璃分离的主要原料或添加剂,部分已用于生产。 & nbsp& nbsp& nbsp& nbsp为便于选用接近玻璃原料的尾矿作为玻璃的主要原料或添加配料熔化玻璃,现将生产玻璃所用主要原料的质量要求叙述如下:& nbsp& nbsp& nbsp(1)应时或应时的砂岩:& nbsp& nbsp& nbsp& nbsp应时或应时对砂岩的质量要求见表1。 & nbsp1 & nbsp要求SiO 2(%)al2o 3(%)fe2o 3(%)cr2o 3(%)TiO 2(%)的质量等级。一级玻璃的要求是> 99 > 98 > 96 < 0.5 < 1 < 2 < 0.05 < 0.1 < 0.2 < 0.001-< 0.01。& nbsp& nbsp& nbsp& nbsp& nbsp注意:氧化铁(Fe2O3)、氧化铬(Cr2O3)和氧化钛(TiO2)都是有害的杂质成分,它们使玻璃着色。 & nbsp& nbsp& nbsp& nbsp石英砂和应时砂岩的粒度在0.1-0.75毫米之间 优选70%-80%在0.1-0.5毫米 & nbsp& nbsp& nbsp& nbsp(二)添加剂:& nbsp& nbsp& nbsp& nbsp1.白云石& nbsp& nbsp& nbsp& nbsp一级:MgO > 20%;Fe2O3<0.1% & nbsp& nbsp& nbsp& nbsp二级:MgO > 19%;Fe2O3<0.2% & nbsp& nbsp& nbsp& nbsp粒径:0.75 ~ 1.0mm & nbsp& nbsp& nbsp& nbsp& nbsp2.石灰石:& nbsp& nbsp& nbsp一级:Cao > 54%;Fe2O3<0.15% & nbsp& nbsp& nbsp& nbsp一级:Cao > 47%;Fe2O3<0.2% & nbsp& nbsp& nbsp& nbsp玻璃适用于低硬度的白云质石灰岩和石灰岩。 大于0.75 ~ 1.0mm的颗粒 & nbsp& nbsp& nbsp& nbsp& nbsp3.长石:& nbsp& nbsp& nbsp& nbspal2o 3 > 18%;fe2o 3 < 0.2%;二氧化硅< 70% & nbsp& nbsp& nbsp& nbsp粒径:0.1 ~ 0.5毫米 & nbsp& nbsp& nbsp& nbsp& nbsp4.萤石& nbsp& nbsp& nbsp& nbsp& nbspcaf 2 > 80%;Fe2O3<0.2%。& nbsp& nbsp& nbsp& nbsp& nbsp5.芒硝& nbsp& nbsp& nbsp& nbsp& nbspna2so 4 > 94%;不混溶残留物< 3%;NaCl < 1.2%;硫酸钙< 1.5%;Fe2O3<0.2% & nbsp& nbsp& nbsp& nbsp粒径:1.0 ~ 1.5毫米 & nbsp& nbsp& nbsp& nbsp制造高档玻璃需要原料的质量。对原料中的SiO2、Al2O3、K2O、Na2O、CaO、MgO等成分有一定要求,不要求含量稳定。同时,有害成分如铁和镉的含量应低。 否则,玻璃分离会产生着色、气泡、玻璃肋或斑点。 但在制造一些普通玻璃和家用器皿时,当原料质量可以适当降低时,可以考虑利用以下类型矿山的尾矿:1。富含二氧化硅的应时脉状金和钨矿;2.富含应时和长石的伟晶岩型钽铌矿;3.富含方解石、白云石和萤石的碳酸盐矿床。 当有害杂质含量很低时,不同品质的尾矿可以用来制作不同用途的玻璃离聚物。 & nbsp& nbsp& nbsp& nbsp二。用尾矿熔化离聚物:& nbsp& nbsp(1)长石基尾矿用作玻璃生产的原料:& nbsp& nbsp& nbsp株洲玻璃厂现生产三种优质玻璃,其产品成分如表2所示。 & nbsp2 & nbsp株洲玻璃厂三种玻璃产品的成分:产品类型:化学成分(%)SiO 2 al2o 3 fe2o 3 Cao MgO 2 OS 3平板玻璃> 2.02.36.454.214.750.3压花玻璃71.81.2011.01.514.200.3玻璃球67 . 36 . 60 < 0 . 49 . 50 & nbsp;& nbsp& nbsp& nbsp该厂使用的应时原料包括广东海砂和湖南雷子的应时砂岩,以及中南03矿的尾矿,其主要矿物为应时和长石。 化学成分见表3。 & nbsp表3:中南03号矿山尾矿化学成分化学成分SiO2Al2O3Fe2O3Na2OK2O含量(%)80.26 ~ 80.9211 . 28 ~ 11.540 . 09 ~ 0.124 . 03 ~ 4.442 . 99 ~ 3.50:& nbsp;& nbsp& nbsp现将中南03矿平板玻璃生产情况简要介绍如下 & nbsp& nbsp& nbsp& nbsp& nbsp1.配料& nbsp& nbsp& nbsp& nbsp各原料的化学成分见表4,各成分的用量及其计算的化学成分见表5。 & nbsp& nbsp表4:化学成分表原料名称产地SiO 2 al2o 3 fe2o 3 CaomGona 2o 2 O2 N2 co 3 na 2 so 4海砂广东98 . 401 . 200 . 060 . 01:& nbsp;& nbsp& nbsp& nbsp& nbsp砂岩湖南雷子排98 . 720 . 480 . 080 . 080 . 05:& nbsp;& nbsp& nbsp& nbsp80.8011.130.100.100.107.61中南03矿,长石:& nbsp& nbsp1.870.360.0736.6220.43,湖南白云临湘:& nbsp& nbsp& nbsp& nbsp湖南东安石灰岩1 . 270 . 140 . 0654 . 120 . 68:& nbsp;& nbsp& nbsp& nbsp汽水 辽宁大连:& nbsp;& nbsp& nbsp& nbsp& nbsp& nbsp99.01 & nbsp& nbsp山西邙山运城& nbsp& nbsp& nbsp0 . 380 . 04 & nbsp;& nbsp& nbsp94.75 & nbsp我们的可乐厂:& nbsp& nbsp& nbsp& nbsp& nbsp& nbsp& nbsp& nbsp86.59 & nbsp表5:玻璃成分化学成分表原料名称原料SiO 2(%)al2o 3(%)fe2o 3(%)Cao(%)MgO(%)Na2O(%)K2O(%)SO3(%)海砂30.1629 . 680 . 360.20 & nbsp;& nbsp& nbsp& nbsp& nbsp砂岩30.1229 . 730 . 140.020 . 020.02:& nbsp;& nbsp15.3612.411.710.020.020.021.17长石尾矿:白云石20.360 . 380 . 070.016 . 234.16:& nbsp;& nbsp0.31石灰岩:& nbsp& nbsp0.17 & nbsp& nbsp& nbsp& nbsp纯碱20.32:& nbsp;& nbsp& nbsp& nbsp11.71 & nbsp& nbsp芒硝3.92:& nbsp;& nbsp0.01 & nbsp1.62 & nbsp& nbsp可乐0.25:& nbsp;& nbsp& nbsp& nbsp& nbsp& nbsp& nbsp合计120.7072 . 202.280 . 076.454 . 2014.500 . 30计算玻璃成分指数:72.202.356 . 454.2014.500 . 30 & nbsp;& nbsp& nbsp& nbsp& nbsp& nbsp2.生产技术:& nbsp& nbsp& nbsp将表5中的原料粉碎(并过筛)至所需的粒度。 分别用空输气管输送入库,按表中比例称量,混合,送入池窑熔成玻璃熔体,然后下沉,冷却,送入压延机成型,冷却后切成板材。 & nbsp& nbsp& nbsp& nbsp此外,最近,为了节约玻璃生产中纯碱的消耗,上海化工学院对使用花岗岩尾矿作为玻璃原料的工厂和矿山进行了调查,并对两个矿山的尾矿熔化玻璃进行了初步试验。 根据调查尾矿的矿物组成,主要矿物为长石、应时,其次为云母矿物,且大多数矿物的化学成分相似。 合肥玻璃厂用瓷石为原料生产瓶用玻璃,上海日用器皿公司玻璃六厂、玻璃八厂也用瓷石和宿迁砂生产棕色药用瓶和食品罐。 因此,利用花岗岩尾矿作为某些玻璃制品的原料是可能的。 各矿山花岗岩类原矿和尾矿的化学成分见表6。 & nbsp表6:各种花岗岩类型的原矿和尾矿的化学成分名称;产地化学成分:SiO 2 al2o 3 fe2o 3 feomnocaomgok 2 ona 2 O烧出锂云母钠长石花岗岩原矿江西67.9417 . 350 . 070 . 220 . 140 . 14—2.51 & nbsp;1.74尾矿(一)江西74 . 2015 . 010 . 26 & nbsp;& nbsp0.57—1.61 & nbsp;& nbsp尾矿(B)江西71 . 3615 . 600 . 37:& nbsp;0.55 & nbsp2.46 & nbsp& nbsp尾矿(C)江西69 . 6215 . 720 . 095:& nbsp;0.38—2.56 & nbsp;& nbsp广西白云母花岗岩矿75 . 3115 . 340 . 410 . 54:0 . 410 . 172 . 86 & nbsp;& nbsp广西白云母花岗岩矿76 . 2813 . 090 . 740 . 66:0 . 480 . 164 . 53 & nbsp;& nbsp花岗岩矿石江西68 . 7015 . 702 . 830 . 09—3.50 & nbsp;& nbsp花岗岩风化壳广东72 . 0515 . 402 . 56 & nbsp;0.330.114.374.92瓷石(ⅰ)安徽77 . 0812 . 620 . 45:& nbsp;0 . 150 . 178 . 69 & nbsp;瓷石(二)安徽77 . 2413 . 070 . 23:& nbsp;0 . 530 . 207 . 56 & nbsp;宿迁沙江苏83 . 39 . 1 & nbsp;& nbsp& nbsp0.30 & nbsp6.20 & nbsp& nbsp& nbsp& nbsp& nbsp& nbsp& nbsp利用长石尾矿生产玻璃时,为了避免因尾矿中铁含量高而使玻璃着色,产生气泡、玻璃筋或斑点,需要研究尾矿中含铁物质与共生或伴生矿物的关系、晶体嵌布粒度等。从而分离和降低尾矿中的铁含量。 铝含量高的尾矿可用于制造瓶罐用玻璃、纤维中的碱球、低碱无硼玻璃等。从开发新型建筑材料的角度来看,尾矿可以用来制造彩色微晶玻璃平板玻璃、彩色微晶玻璃“马赛克”、彩色微晶玻璃瓦以及其他微晶玻璃建筑材料等。具有广阔的应用前景。 & nbsp& nbsp& nbsp& nbsp(2)尝试用铁矿尾矿制造分离容器:& nbsp;& nbsp& nbsp鞍山胶耐设计院利用鞍山某选矿厂的尾矿试制玻璃器皿,并进行了初步的探索试验。尾矿的化学成分见表7。 & nbsp& nbsp表7:鞍山选矿厂尾矿化学成分(%):FeO Fe 2 o 3 SiO 2 caomgoal 2 o 3s;烧失量含量:6.8717 . 5062 . 001 . 990 . 721 . 0190 . 0311.27:& nbsp;& nbsp& nbsp& nbsp1.84%的尾矿和16%的碳酸钠在带有小石墨坩埚的焙烧炉中加热。原料在1200℃开始熔化。当温度达到1380℃时,取出坩埚,倒出玻璃液。 玻璃又黑又密,含有未熔化的小颗粒,有时气泡较多。 & nbsp& nbsp& nbsp& nbsp& nbsp2.硝酸钠和氯化钾用于助熔和脱色。尝试以下三种配料方案:& nbsp& nbsp& nbsp& nbsp(1)尾矿:碳酸钠:氯化钠:硝酸钠= 100: 25: 11: 7,在低于1300℃的坩埚中烧制 & nbsp& nbsp& nbsp& nbsp(2)尾矿:碳酸钠:硝酸钠:熟石灰= 100: 25: 10: 15,在炉温1380℃的坩埚中烧制 & nbsp& nbsp& nbsp& nbsp(3)尾矿:碳酸钠:硝酸钠:熟石灰= 100: 25: 18: 20,在炉温1380℃的坩埚中烧制 & nbsp& nbsp& nbsp& nbsp测试进展:第一批方案燃烧的玻璃离聚物是棕色的、不透明的,含有许多细小的未熔化的沙粒。 在第二批方案中,在1240℃,样品是棕色的,没有发现气泡或未熔化的颗粒。9小时后,当温度达到1270℃时,样品呈深棕色。4小时后,温度达到1320℃,样品颜色越来越深。 在1270℃的温度下,对玻璃瓶进行人工吹制和机械吹制。在空气体中和冷却窑中冷却后,结果良好,只是颜色是黑色的。 & nbsp& nbsp& nbsp& nbsp从这个角度来看,利用尾矿熔制玻璃时,尾矿中所含的有害成分,尤其是氧化铁和硫的含量不宜过高。氧化铁在熔化过程中,热量不易传导到熔体中间,原料难以烧穿,同时玻璃颜色较暗。 如果通过选矿去除尾矿中的铁、硫、钛、铬等杂质,并添加适当的其他成分,完全可以烧制出日用玻璃隔热器皿。 
免责声明:本网部分内容来自互联网媒体、机构或其他网站的信息转载以及网友自行发布,并不意味着赞同其观点或证实其内容的真实性。本网所有信息仅供参考,不做交易和服务的根据。本网内容如有侵权或其它问题请及时告之,本网将及时修改或删除。凡以任何方式登录本网站或直接、间接使用本网站资料者,视为自愿接受本网站声明的约束。

下一篇:回风顺槽高抽措施巷Ⅱ安全技术措施

上一篇:抽巷绞车选型验算及安全技术措施